Getting Started
❖ Envelope
Item
Supported paper tray
Duplex supported size
Notes
2
Unsupported Types of Paper
Avoid using the following paper as they are not supported by this machine.
• Paper meant for an ink-jet printer
• Bent, folded, or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Paper that is dry enough to emit static electricity
• Paper that has already been printed onto, except a preprinted letterhead.
Malfunctions are especially likely when using paper printed on by other than
a laser printer (e.g. monochrome and color copiers, ink-jet printers, etc.)
• Special paper, such as thermal paper, aluminum foil, carbon paper and con-
ductive paper
• Paper that is heavier or lighter than the specified limitations
• Paper with windows, holes, perforations, cutouts, or embossing
• Adhesive label paper on which the adhesive underlayer or base paper is ex-
posed
• Paper with clips or staples
• Do not use ink-jet printer paper because it may stick to the fusing unit and
cause a paper jam.
• Do not use paper that has already been printed onto by other printers.
Note
❒ Even supported types of paper may cause paper jams or malfunctions if the
paper is not in good condition.
62
Description
Bypass tray
None
• Avoid using self-adhesive envelopes. They may cause
machine malfunctions.
• The number of envelopes that can be printed in one
minute is approximately half that of plain paper.
• If printed envelopes come out badly creased, load the en-
velopes in the opposite direction. Also, configure the
printer driver to rotate the print object 180 degrees.
For details about changing the loading orientation, see
the printer driver Help.