Changing To A Size That Is Not Automatically Detected - Ricoh 9050b Operating Instructions Manual

6. Adding Paper, Toner and Staples
7. Carefully slide the paper tray fully in.
8. Check the size on the display.

Changing to a Size That Is Not Automatically Detected

If you load a paper size that is not selected automatically, you need to specify the paper size with the
6
control panel. This section describes how to load such paper.
1. Press the [User Tools / Counter] key.
2. Press [System Settings].
3. Press [Tray Paper Settings] tab.
104
BBR011S
BBT052S