Output Order
This option lets you specify whether your document prints face up or face down in
the printer's output trays. Select the option in one of three ways (driver selections
override all other settings):
Through the printer's front panel Printer Defaults menu.
In a supported printer driver; Output Order option or Output Face Up
option.
Through PhaserLink software under Configure Printer Defaults.
N
O T E
The driver or PhaserLink selections override the front panel setting.
Output Order: Face Up
Pages are output in the external tray on the left side of the printer.
Pages are output so that the first page is on the bottom.
Depending on the driver you are using, check the Output Face Up box on,
or select Face Up.
Output Order: Face Down
Pages are output in the upper output tray, on top of the printer.
Pages are output face down in numerical order.
Depending on the driver you are using, uncheck the Output Face Up box,
or select Face Down.
Hints
Most prints from the Multi-Purpose Tray are output face up, depending on
the media type. If you select Paper at the Media Type prompt, you can
select Face Down, and output will be on top of the printer.
If you are using the Quick Collate option — depending on the driver you
are using — select Output Face Down, or uncheck the Output Face Up
box.
Advanced Features and Troubleshooting Manual
Advanced Print Features
2
13