Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual page 14

2
Advanced Print Features
6 Phaser 780 Color Laser Printer
Before printing, make sure that the fonts specified in your document are installed in
the printer or are set up correctly. If you request a font in an application that is not
resident in the printer, or is not correctly installed, the text is printed in Courier
typeface.
See "Connecting Peripheral Devices" on page 85 for more information on using an
external SCSI disk for font storage.
Downloading fonts from a Macintosh
1.
From the printer's CD-ROM, run the Installer application. Select Custom
Install. Select Printer Utilities.
2.
From the PhaserTools folder on your computer's hard disk, double-click
Apple Printer Utility. Select your printer's zone (AppleTalk Zones) and
your printer (Printers).
3.
Click Open Printer; a dialog box appears.
4.
Click the arrow next to Printer Preferences.
5.
Click the arrow next to Fonts for a list of installed fonts and locations.
6.
Click Add.
7.
Select your font folder, then select the font you want to download.
8.
Under Destination, select the download location: either the printer's
memory or an attached hard disk.
9.
Click Add for one font or click Add All for all fonts in the folder.
10.
Click Send; the font(s) appear in the list.
N
O T E
To remove downloaded fonts, click Remove.
Downloading fonts with Windows 95/Windows 98 (parallel connection only)
To download fonts to a SCSI hard drive, download the DOS-based utility
PCSEND.EXE (developed by Adobe Systems Inc. for downloading Adobe fonts)
from the Tektronix ftp server, using the following address:
ftp://ftp.tek.com/Color_Printers/bbs/pcs/misc_utilities/PCSEND.EXE
See "Downloading files from the Tektronix ftp server" on page 84 for more
information.
N
O T E
PCSEND.EXE will support downloading of fonts to a printer directly connected to a
parallel port on the computer. It does not support printers connected via Ethernet.