Msds For Developer - Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual

MSDS for Developer

Section 1 – Product Identification
Trade Names Tektronix Part Number:
Black Developer Assembly
Cyan Developer Assembly
Magenta Developer Assembly
Yellow Developer Assembly
Product Use: Tektronix Phaser
Section 2 – Information On Ingredients
Ingredients
Developers are a proprietary blend of copper-zinc ferrite (CAS 66402-68-4), resins and pigments, encased in a
cartridge.
Section 3 – Hazards Identification
ROUTES OF EXPOSURE: Developer granules are encased in a cartridge and are not accessible, unless cartridge is
forcibly broken.
POTENTIAL HEALTH EFFECTS: Health effects from this product are expected to be negligible, when product is
used as intended.
Immediate Effects:
Inhalation: Minimum irritation to respiratory tract.
Skin: Non-irritant and non-sensitizer for skin.
Eye: Non-irritating to eyes.
Ingestion: Not an expected route of exposure.
Chronic Effects: None known or expected.
SIGNS AND SYMPTOMS OF EXPOSURE: Minimal irritation to respiratory tract, as for any non-toxic dust.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None when used as intended.
Section 4 – First Aid Measures
Inhalation: Unlikely route of exposure. In the event of exposure, remove person to fresh air. Seek medical attention if
symptoms occur.
Eyes: If particles get into eye, flush thoroughly with water. Seek medical attention if symptoms occur.
Skin: Wash thoroughly with soap and water. Seek medical attention if symptoms of irritation occur.
Ingestion: Dilute stomach contents by drinking several glasses of milk or water. Seek medical attention immediately.
Section 5 – Fire Fighting Measures
Flammable Properties:
Flash Point: Not applicable.
Fire & Explosion Hazards: This product is combustible. No unusual hazards are expected.
Extinguishing media: Use CO
protective clothing and self-contained breathing apparatus.
Section 6 – Accidental Release Measures
Spill Or Leak: Developer granules may be cleaned up with a broom or vacuum and placed in a convenient waste
disposal container. Clean up residue if necessary with soap and water.
Section 7 – Handling And Storage
Handling: No special requirements.
Storage: No special requirements.
Section 8 – Exposure Control – Personal Protection
No special protection indicated when used as intended.
TLV/PEL: Black developer contains carbon black, which has an OSHA Permissible Exposure Limit (PEL) of 3.5 mg/m
(milligrams per cubic meter of air), as an eight-hour time-weighted average. The ACGIH Threshold Limit Value (TLV) is
3
also 3.5 mg/m .
118-9782-00
118-9783-00
118-9784-00
118-9785-00
®
780 color printers
, dry chemical, foam, or water. Avoid inhalation of smoke. As for any fire, wear
2
Advanced Features and Troubleshooting Manual
Regulatory Information and Specifications
9
3
105