Copying To Fit Full-Bleed Images - Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual

Copying to fit full-bleed images
If your original's image extends to its outer edges — often called a full-bleed
image — and you wish to copy the entire image, set Zoom to approximately 95%.
The full image will be printed, at a slightly reduced scale, within the printer's
maximum printable area.
1. Original print
Find a full-bleed original.
2. Original on the scanner's glass
Using the front panel controls, set Zoom to approximately 95% (you will
need to experiment to determine the scaling value that works best with
your printer). Lower the document cover. At the printer's front panel,
press Copy. Refer to "Making copies" on page 92 for instructions on using
the printer's front panel to make copies.
3. Copy print
Note that the entire image now fits, at a slightly reduced scale,
entirely within the printer's printable area.
1
Using Your Printer with a Scanner
Place the original on the scanner glass.
2
Advanced Features and Troubleshooting Manual
8
3
9925-20
97