Making Copies; Copying A Single - Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual

8
Using Your Printer with a Scanner

Making copies

Copying a single page
92 Phaser 780 Color Laser Printer
Making a copy with your scanner and printer is similar to making a copy with a
photocopier:
1.
Raise the scanner's document cover.
2.
Place the original image face down on the scanner's glass; position the
image in your scanner according to its instructions.
3.
At the printer's front panel, press the right arrow button to scroll to the
Copier Menu; press Select.
4.
Press the right or left arrow buttons to scroll to the following functions as
needed:
Number of Copies/Print
Color Mode
Adjust Color
Adjust Contrast
Adjust Darkness
Zoom
Scan Area
Select Tray
Set Defaults
5.
Press Menu to enter the individual submenus. Press the right or left arrow
buttons to scroll to the appropriate selections, then press Select. To return
to the previous submenu, press Exit (far right button) once.
6.
When you are ready to print your copies, press the right or left arrow
buttons to scroll to the Number of Copies/Print menu. Press Menu.
7.
If you want more than one print, press the right arrow button to increase
the number.
8.
Press Print to make your copy.
9.
To return to the Ready message, press the Exit button twice.
N
O T E
If you return to the top level of the printer menu without saving your settings as
default settings, you will lose your copier settings.
The image is transferred to the printer. The first copy normally takes 30 to 60
seconds. The subsequent copies are output at the printer's rated speed.