Using The Front Panel Copier Menu - Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual

8
Using Your Printer with a Scanner

Using the front panel Copier Menu

94 Phaser 780 Color Laser Printer
The printer allows you to control the settings listed in the table below. From the
printer's Help Pages menu, select Menu Map to print a Copier Menu.
Copier menu setting Purpose
Number of Copies/Print Selects up to 999 copies. To change the desired number, press
the right or left arrow button.
Press down and hold the arrow button to autoincrement the value.
Release the button when the desired number of copies is
displayed.
Color Mode Selects the type of color reproduction from the following:
Adjust Color
Adjust Contrast Adjusts the contrast on a scale of –10 (lowest contrast) to +10
(highest contrast).
Adjust Darkness Lightens or darkens your prints on a scale of –10 (lightest) to
+10 (darkest).
Zoom Enlarges or reduces the size of the copy image from
approximately 25% to 1000% of the original's image size,
depending on your scanner. The default setting is 100%. To
change the scale value, press the right or left arrow button.
Press down and hold the right or left arrow button to
autoincrement the value. Release the button when the desired
number of copies is displayed.
Scan Area Selects the size of your original image or input.
Scan Tray Selects the media tray from which your copy or output will be
printed.
Set Defaults
Color Image: For full-color images. The image is reproduced
with as accurate as possible color matching.
Color Text: For images with colored text, line art or charts. The
image is reproduced in full color, but text colors are accentuated
and scanning occurs at a higher resolution to maintain text
definition.
Gray Scale: For copying or creating monochrome images. The
image is reproduced in shades of gray.
Black and White: The image is reproduced in full white and full
black only. Especially suitable for copying line drawings.
Brightens or increases the saturation of all colors or reduces the
saturation (add black) on a scale of –10 (blackest) to +10 (most
saturated, brightest). Zero, the default, is neutral.
Adjusts the red/green and blue/yellow color balance.
The options available (for example, Letter, Legal, Tabloid, A3)
will depend on the scan area of your scanner.
Tray Size, the default selection, copies an area equal to the size
of the media in the selected tray. If the media in the tray is larger
than the area the scanner can image, it will scan the largest
possible area and scale the image up to fit the media, without
distortion.
The options available will depend on the number of media trays
in your printer.
Changes the printer's front panel default settings and saves your
own settings for the kinds of copies you typically make.
Resets the defaults to the printer's original selections.