Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual page 80

5
Using Color
72 Phaser 780 Color Laser Printer
3.
Print your document; select these printer settings in a driver, or from the
front panel, or with a downloadable utility file (driver settings override all
other selections):
Color correction:
Print quality:
Media:
For final output on a 5+ color printing press
For colors to be printed as a process color (no spot colors), follow these steps:
1.
Open the application.
2.
Before separating the file for printing press plates, replace the printer's
PANTONE process Colors with standard PANTONE Colors.
PANTONE Colors from color selection books
In some applications, you can select colors from PANTONE Color selection books.
These colors can be proofed on your Phaser printer before final output on a printing
press.
Use the following instructions when printing proofs for print jobs with these
specifications:
Final output on a 4-color printing press (no spot colors).
Spot colors and process colors for final output on a 5+ color printing press.
1.
From an application, select PANTONE Colors; use individual color values
from a PANTONE Colors selection book.
2.
Print your document; select the Commercial Press color correction. (Proof
colors may not be completely accurate, but PANTONE Colors will be
printed correctly on a printing press.)
3.
When you are satisfied with the proof, the file can be separated for printing
press plates without adjustment to the file.
None
Standard (use Standard file set)
Enhanced (use Enhanced file set)
Photo (use Enhanced file set)
Paper