Making Copies; Copying A Single - Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual

9
Using Your Printer with a Scanner

Making copies

Copying a single page
150 Phaser 740 and 740L Laser Printers
Making a copy with your scanner and printer is similar to making a copy with a
photocopier:
1.
Raise the scanner's document cover.
2.
Place the original image face-down on the scanner's glass; position the
image in your scanner according to your scanner's instructions.
3.
At the printer's front panel, press Copier; the printer displays the
following message:
# of Copies
Menu ---->
Press Copy to make a print of your original or, if you have other settings
to change, go on to the next step.
4.
Scroll to the following menus as needed by pressing the arrow button.
Color Mode
Lighten/Darken
Color Saturation
Zoom
Scan Area
Select Tray
Refer to "Using the front panel Copier Menu" on page 152 for details
on each of these menus.
5.
To enter the individual submenus, press Menu. Scroll to the appropriate
selections within those menus.
6.
Press Copy.
7.
To return to the previous submenu, press
message, press
N
O T E
If you return to the top level of the printer menu without saving your settings as
default settings, you will lose your copier settings.
8.
After making the appropriate selections, press Copy.
The image is transferred to the printer. The first copy normally takes
30 to 60 seconds. The subsequent copies are output at the printer's rated speed.
Copy
twice.
once. To return to the Ready