Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual page 46

2
Advanced Print Features
36 Phaser 740 and 740L Laser Printers
4.
To determine if the margins need adjustment:
a.
Hold the page up to the light to see if the margin on the front and back
sides align.
b.
Use the page's top- and left-margin gauges to note how much the
alignment is off.
5.
Adjust the left margin:
a.
In the Calibrate Margins menu, scroll to Adjust Left Margin.
Press Menu.
Adjust Left Margin:+0
<--- --->
b. Enter the amount of adjustment from Step
increase or decrease the amount); press OK.
6.
Adjust the top margin:
a.
Scroll to Adjust Top Margin. Press Menu.
Adjust Top Margin:+0
<--- --->
b.
Enter the amount of adjustment from Step
increase or decrease the amount); press OK.
7.
Reprint the calibration page to confirm the adjustment.
OK
4
OK
4
(press <--- or ---> to
(press <--- or ---> to