Selecting Options In The Phaserprint Dialog Box; Number Of Copies; Print Using (Macintosh) - Tektronix Phaser 850 User Manual

Selecting options in the PhaserPrint dialog box

Settings you make in the PhaserPrint plug-in remain in effect until you change them. The
exception is Number of Copies, which defaults to 1 each time you start the plug-in.
Note
You can get information on any of the plug-in's features or printer-specific
options with the online Help function.

Number of copies

Enter the number of copies to print, from 1 to 1000.

Print using (Macintosh)

The Print using pop-up menu lets you choose between printing an image or saving the
image to disk.
I
AppleTalk: Prints the image to the printer currently selected in the Chooser; the
currently selected printer name is displayed in the Printer model field. If the selected
printer is not a PostScript printer, this option is unavailable (grayed-out).
I PostScript file: Saves an image to disk as a PostScript file. Click Save; a dialog box
lets you choose a new or existing file for saving the PostScript code.
When selected, the File format pop-up menu becomes available. This pop-up menu
has two options: ASCII base-85 and Binary.
ASCII base-85: Image data is encoded using an ASCII base-85 filter during file
I
output, making the resulting PostScript file portable, and downloadable through
interface ports that don't support binary data. Note that the file may be up to
25% larger.
Binary: Image data is output in binary format.
I
Advanced Features and Troubleshooting Manual
PhaserPrint Plug-in for Photoshop
85