Output Order - Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual

Output Order

This option lets you specify whether your document prints face-up or face-down in
the printer's output tray. Select the option in one of three ways (driver selections
override all other settings):
Through the printer's front panel in the Printer Defaults menu.
In a supported printer driver; Output Order option or Output Face Up
option.
Through PhaserLink Printer Management software under Configure
Printer Defaults.
N
O T E
The driver or PhaserLink selections override the front panel setting.
Output Order: Face Up
Pages are output so that the first page is on the bottom.
Depending on the driver you are using, check the Output Face Up box on,
or select Face Up.
Output Order: Face Down
Pages are output face-down in numerical order.
Depending on the driver you are using, uncheck the Output Face Up box,
or select Face Down.
Output Order hints
When printing on transparencies, the printer always prints your document
face-up.
For prints from the Multi-Purpose Tray, output order is always face-up.
If you are using the Quick Collate option — depending on the driver you
are using — select Output Face Down, or uncheck the Output Face Up
box.
Advanced Features and Troubleshooting Manual
Advanced Print Features
2
45