Making Copies; Copying A Single - Tektronix PHASER 840 Advanced Features And Troubleshooting Manual

9
Using Your Printer with a Scanner

Making copies

Copying a single page
114 Phaser 840 Color Printer
Making a copy with your scanner and printer is similar to making a copy with a
photocopier:
1.
Raise the scanner's document cover.
2.
Place the original image face-down on the scanner's glass; position the
image in your scanner according to your scanner's instructions.
3.
At the printer's front panel, press Copier; the printer displays the
following message:
Copy Count
Begin Copy
Copier Options
To enter the number of copies to print, scroll to Copy Count; press
Select. Use the up or down arrows to set the count; press Select. To
make a print of your original, scroll to Begin Copy; press Select.
Go to the next step if you have other settings to change.
4.
Scroll to Copier Options; press Select.
5.
Scroll to the following menus as needed by pressing the arrow buttons.
Color Mode
Lighten/Darken
Color Saturation
Zoom
Original Page Size
Tray Selection
Save Defaults
Reset Defaults
Refer to "Using the front panel Copier Menu" on page 116 for details
on each of these menus.
6.
To enter the individual submenus, press Select. Scroll to the appropriate
selections within those menus. To return to the previous submenu, scroll to
Previous Menu; press Select.
C
A U T I O N
If you return to the top level of the printer menu without saving your settings as
default settings, you will lose your copier settings.
7.
After making the appropriate selections, scroll to Begin Copy; press
Select.
The image is transferred to the printer. The first copy normally takes
30 to 60 seconds. The subsequent copies are output at the printer's rated speed.