Connecting Peripheral Devices - Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual

Chapter
8
Connecting Peripheral
Devices
Your printer's optional SCSI (Small Computer System Interface) port is used for
connecting external hard disk drives and scanners — all are SCSI devices.
The Plus, Duplex, and Extended configurations of the printer include support for
SCSI devices; Standard configurations of the printer require the Plus Features option
(option FP, order number Z740FP).
The printer supports up to seven SCSI devices, as long as each has a unique SCSI ID
number (any number between 0 – 6) and the final device in the "daisy chain" is
appropriately terminated. Devices can be connected in any combination of model
and storage capacity.
SCSI peripheral devices
Device
Tektronix external SCSI hard disk
drives
ZDISK
Scanners
Uses
Storing downloaded fonts, data, and programs.
Temporary storage during job collation.
SCSI hard disk is included on the Extended
configuration of the printer.
Turns your printer into a convenient color copier.
For a list of supported scanners, contact your local
Tektronix reseller or visit the Tektronix web site:
www.tek.com/Color_Printers/
Advanced Features and Troubleshooting Manual 143