Jam At Multi-Purpose - Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual

Jam at Multi-Purpose

1.
Remove all media in the Multi-Purpose Tray.
2.
Remove the complete piece of jammed media from the Multi-Purpose Tray.
3.
Make sure that you set the Media Thickness Switch for the media that you
are using.
4.
Re-insert the media in the Multi-Purpose Tray.
5.
Open and close the printer's front door to clear the error message in the
front panel.
Advanced Features and Troubleshooting Manual
Troubleshooting
0236-35
105
4