Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual page 30

2
Advanced Print Features
20 Phaser 740 and 740L Laser Printers
Envelopes
1.
Prepare each envelope by tucking the envelope flap inside the envelope.
2.
Adjust the printer's Media Thickness Switch to Thick.
3.
Adjust the tray's media guides for the width of your envelopes.
4.
Insert the envelopes with the short end entering the printer first and the
side to be printed facing up; the edge where you place the stamp enters the
printer first in some applications (make a test print before proceeding).
5.
Fill the Multi-Purpose Tray to the level indicator on the guide (maximum
capacity is 10-15 envelopes, depending on thickness).
N
O T E
Print only 10-15 envelopes at a time. This printer is not made to handle
high-capacity production envelope printing. Envelopes may wrinkle depending on
weight and stiffness of envelope media.
6.
At the front panel's media type prompt, scroll to Card or Envelope and
press OK.
MPT: Card or Envelope
<--- --->
7.
In the front panel's Printer Defaults menu, scroll to Multi-Purpose
Media and select #10 Envelope under Media Size.
3
4
OK
0236-17
0236-18