Adjusting Margins For A Duplex Print - Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual

Adjusting margins for a duplex print

You might want to adjust the margins on a two-sided page if the image area of the
front side (shown in blue) is not aligned with the image area of the second side
(shown in red).
1.
Adjust the margins for a single-sided print (refer to page 33).
2.
In the front panel's Printer Defaults menu, enable the Duplex mode:
select Long-Edge or Short-Edge.
3.
Print the Margin Adjust page from the front panel.
a.
Press Menu.
b.
Scroll to Calibrate Margins. Press Menu; the display reads:
Print Calibration Page
<--- --->
c.
Press Print.
0236-62
Print
Advanced Features and Troubleshooting Manual
Advanced Print Features
2
35