Printing A Color Sampler Chart From The Front Panel - Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual

Printing a color sampler chart from the front panel

N
O T E
The HSB (Hue, Saturation, Brightness) color sampler chart and the PANTONE
Color sampler chart cannot be printed from the front panel. To print a PANTONE
Color chart, refer to "Printing the PANTONE® Color Chart" on page 133.
1. Decide which color correction to use; refer to the topic, "Color corrections"
on page 118.
2.
When the Ready message appears in the printer's front panel, press Menu;
this message appears:
Help Pages
<---- ---->
3.
Press <---- or ---->; scroll to the following message:
TekColor Correction
<---- ---->
4.
Press Menu; this message appears:
TekColor:None
<---- ---->
The asterisk (*) indicates the current selection.
5.
Scroll to the desired color correction, then press OK.
6.
Press until Ready appears.
7.
Press Menu twice; this message appears:
Menu Map
<---- ---->
8.
Scroll to RGB Color Sampler or CMYK Color Sampler.
9.
Press Print.
10.
For future reference, write the name of the color correction that you used
on the first page of the chart.
Selecting a color correction in an application
1.
In an application — using the colors on the sampler chart — select the
desired colors; apply the colors in your document.
2.
Print your document; select the same color correction that you used to print
the color sampler chart.
Menu
Menu
*
OK
Print
Advanced Features and Troubleshooting Manual
6
Using Color
129