Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual page 113

Solution 2
C
A U T I O N
The Fuser is hot; to avoid personal injury, handle only the areas marked in blue. If
desired, open the front door and wait for the Fuser to cool before touching it.
1.
Open the front door and the right side door.
2.
Turn the Fuser's large blue knob counterclockwise to release the jammed
media.
3.
Remove the jammed media from the right side of the printer.
1
Advanced Features and Troubleshooting Manual
4
Troubleshooting
3
2
0236-36
103