Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual page 33

6.
Refer to your application's manual for information on page orientation and
page margins.
If your application has a setting for Avery
Otherwise, set margins and spacing according to the guidelines in the
instruction sheets that are included with the labels. This table shows which
Avery setting to choose with each label size
Sheet size
A/Letter
A4
7.
In the application's Print screen under Tray Selection or Paper Source,
depending on the driver, select the Multi-Purpose Tray and send the job to
the printer.
Guidelines for printing on labels
C
A U T I O N
To avoid media jams and damage to the printer components, make sure that you
follow these guidelines.
Use Avery label stock.
Each label is at least 25 x 67 mm or 1 x 2.625 in. in size. Smaller labels may
peel off and damage the fuser or imaging unit.
If any of the labels on a sheet are missing, do not use that sheet; it may
damage the fuser or imaging unit.
When selecting Label as the media type, the printer requires that the room
temperature be cooler than 27˚ C (81˚ F). If the temperature is above 27˚ C
(81˚ F), the printer reports an error and stops printing.
™
labels, use it as a template.
.
Label size
3.33 x 4 in.
1 x 2.63 in.
38.1 x 99.1 mm
67.7 x 99.1 mm
Advanced Features and Troubleshooting Manual
Advanced Print Features
Avery™ label
setting
5160
5164
L7163
L7165
2
23