2
Advanced Print Features
Loading Tektronix transparencies
10
Phaser 740 and 740L Laser Printers
1.
Push down on the
TRANSPARENCY
in place.
2.
Fan the transparencies, being careful not to leave fingerprints, which can
result in a smudged print.
3.
Place Tektronix transparencies in the tray so that the logo strip is under the
hooks, face-up.
4.
Load approximately 100 sheets of transparency film. Use the label on the
inside of the tray as a reference for the proper amount of media.
5.
Insert the
TRANSPARENCY
If you have only a single-tray slot, insert the
For printers with the Automatic Duplex/Lower Tray Assembly, insert
the
TRANSPARENCY
For printers with only the Lower Tray Assembly (Duplex Unit is not
installed), insert the
slots.
tray's metal plate until it clicks, locking it
E N
A R
S P
A N
A 4
T R
3
C Y
E N
A R
S P
A N
A 4
T R
tray:
tray into the Middle slot.
tray into the Upper or Middle
TRANSPARENCY
C Y
0236-09
4
0236-10
tray there.
TRANSPARENCY