E-Mail Alerts; Password Settings - Smart Technologies SMART Board 600i5 Configuration And User's Manual

A P P E N D I X A
Remotely managing your system through a network interface

E-mail alerts

This menu enables you to enter your preferred address for receiving e-mail alerts and adjust related
settings.
Submenu setting
E-mail Alert
To
CC
From
Subject
Outgoing SMTP server
Username
Password
Alert Condition

Password settings

This menu provides a security function that allows an administrator to manage projector use and
enable the Administrator Password function.
Submenu setting
Password
64
Description
Selects Enable to turn on or Disable to turn off the E-mail Alert
function.
Displays or allows you to set the e-mail address of the e-mail alert
recipient.
Displays or allows you to set the e-mail address of the e-mail alert
"copy to" recipient.
Displays or allows you to set the e-mail address of the user who
sends the e-mail alert.
Displays or allows you to set the e-mail alert subject.
Displays or allows you to set the Simple Mail Transfer Protocol
(SMTP) server that you use on your network.
Displays or allows you to set the SMTP server user name.
Displays or allows you to set the SMTP server password.
Sends e-mail alerts whenever Lamp Warning, Low Lamp Life,
Temperature Warning and Fan Lock conditions occur. Select the
settings you want, and then click Submit.
N
N O T E
The projector sends an alert e-mail (SMART Alert) to your e-mail
address. Click E-mail Alert Test to confirm that your e-mail
address and SMTP server settings are correct by sending a test
e-mail (SMART Alert-Test Mail).
If the settings are not correct, the e-mail alert messages aren't sent
or received successfully and no warning or notification message are
available to advise of this state.
Description
When the password function is enabled, the administrator password
is required to access Web Management. Select Disable to allow
remote web management of the projector without requiring a
password.