A P P E N D I X
B
Remotely managing your system through an RS-232 serial interface
Command
set emergencyalertmsg
[description]
set emergencyalert [target]
These commands control the current system settings. These commands are available when the
projector is in Standby mode and when it is on.
Command
set restoredefaults
set lamphrs [target]
set vgaoutnetenable [target] =on
set usb1source [target]
set usb2source [target]
N
N O T E
The Network and VGA Out setting's features are off by default. Select on to activate these
features.
80
Command target range
Enter a descriptor no more
than 60 characters long.
=on
=off
Command target range
[none]
=0
=off
=vga1
=vga2
=hdmi
=disabled
=vga1
=vga2
=hdmi
=disabled
Response
emergencyalertmsg=[description]
emergencyalert=[target]
Response
restoredefaults=done
lamphrs=0
vgaoutnetenable=[target]
usb1source=[target]
usb1source=[target]