Smart Technologies SMART Board 600i5 Configuration And User's Manual page 32

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
Projector Name Displays the projector's name as set
by an administrator (maximum 12
characters).
Location Displays the projector's location as set
by an administrator (maximum 16
characters).
Contact Displays the contact name or number
for projector support as set by an
administrator (maximum 16
characters).
Language menu
Language Selects language preference.
Information menu
Lamp Hours Displays the current number of lamp
usage hours from 0 to 4000 hours from
when it was last reset.
Input Displays the currently displayed video
input source (VGA-1, VGA-2,
Composite, S-Video, HDMI or
None).
20
Notes
You can set the projector's name using
the remote management features (see
Remotely managing your system
through a network interface on page 57
and Remotely managing your system
through an RS-232 serial interface on
page 67).
You can set the projector's location
using the remote management features
(see Remotely managing your system
through a network interface on page 57
and Remotely managing your system
through an RS-232 serial interface on
page 67).
You can set the contact name or
number using the remote management
features (see Remotely managing your
system through a network interface on
page 57 and Remotely managing your
system through an RS-232 serial
interface on page 67).
Projector menu support is available in
English (default), Chinese (Simplified),
Chinese (Traditional), Czech, Danish,
Dutch, Finnish, French, German,
Greek, Italian, Japanese, Korean,
Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal),
Russian, Spanish and Swedish.
Always reset the lamp hours after you
replace a lamp, because lamp service
reminders are based on the current
hours of use. See Resetting the lamp
hours on page 41 for details on the
lamp hours reset procedure.