Smart Technologies SMART Board 600i5 Configuration And User's Manual page 72

A P P E N D I X A
Remotely managing your system through a network interface
Submenu setting
Lamp Mode
Auto Power Off
Zoom
H-position (RGB input)
V-position (RGB input)
Aspect Ratio
Startup Screen
Video Mute
60
Description
Adjusts lamp brightness to Standard or Economy. Standard
displays a high-quality, bright image. Economy increases the lamp
life by decreasing the brightness of the image.
Sets the length of the auto power off countdown timer between 1 and
240 minutes. The timer begins to count down when the projector no
longer receives a video signal. The timer finishes when the projector
enters Standby mode. Select 0 to turn off the timer.
Adjusts the zoom to the center of the image in or out from
0 to 30.
Moves the horizontal position of the source video left or right from 0 to
100 (relative to the projected image).
N
N O T E
This is useful in situations where the source video is cut off.
Moves the vertical position of the source video up or down from -5 to 5
(relative to the projected image).
N
N O T E
This is useful in situations where the source video is cut off.
Adjusts the image output to Fill Screen, Match Input or 16:9.
Fill Screen produces an image that fills the entire screen by
l
stretching and scaling.
Match Input matches the projector's aspect ratio to the input's
l
aspect ratio. As a result, black bands might appear along the
top and bottom edges of the screen horizontally (letterbox
format) or along the left and right edges of the screen vertically
(pillarbox format).
16:9 changes the output to 16:9 by letterboxing the image,
l
which is recommended for use with HDTV and DVDs
enhanced for wide-screen television.
N
N O T E
See Video format compatibility on page 29 for appearance
descriptions in each mode.
Sets the type of startup screen to SMART or User. The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup Screen
function.
Turns the video mute setting on or off. Select On to hide the display
and Off to show it again.