Smart Technologies SMART Board 600i5 Configuration And User's Manual page 39

C H A P T E R 3
Using your interactive whiteboard system
Number Function
12 USB B receptacle (for your primary computer)
N
N O T E
This USB receptacle is active only when you select the associated video source
as the projector input source. The associated video source is VGA1 by default, but
you can change it using the projector menu.
Back
13 RJ11 6-conductor receptacle (for SMART Hub™ SE collaboration platform control)
T
T I P
If your computer has an HDMI output, you can connect a USB cable from your computer to either of
the USB B receptacles on the ECP and an HDMI cable from your computer to the HDMI connector
on the projector. Associate the HDMI source with the appropriate USB receptacle (see Adjusting
projector settings on page 14). Press the Input button on the ECP to switch to the HDMI input.
27