Smart Technologies SMART Board 600i5 Configuration And User's Manual page 27

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
V-position Moves the vertical position of the
source video up or down from -5 to 5
(relative to the projected image).
Saturation Adjusts the projected image's color
saturation from 0 to 100.
Sharpness Adjusts the projected image's
sharpness from 0 to 31.
Tint Adjusts the image color balance of red
and green from 0 to 100.
White Peaking Adjusts the image color brightness
from 0 to 10 while providing more
vibrant white shades.
Degamma Adjusts the color performance of the
display from 0 to 3.
Color Adjusts the Red, Green, Blue, Cyan,
Magenta and Yellow colors on the
projector from 0 to 100 to provide
custom color and luminance output.
Audio menu
Volume Adjusts the projector's volume
amplification from -20 to 20.
Mute Mutes the projector's audio output.
Disable Volume Disables the projector's volume control
Control and the ECP's volume control knob.
Closed Captioning Turns closed captioning on or off for
video sources that support closed
captioning.
Closed Captioning Sets the closed captioning language to
Language CC1 or CC2.
15
Notes
Don't adjust this setting unless you're
advised to by SMART Support.
Apply this setting only after you make
all boom adjustments.
This setting applies to VGA inputs only
and is useful in situations where the
source video is cut off.
This setting applies to S-video and
Composite video inputs only.
This setting applies to S-video and
Composite video inputs only.
This setting applies to S-video and
Composite video inputs only.
A value closer to 0 creates a natural
image and a value closer to 10
enhances brightness.
Each color has a default value of 100.
Adjustments to the color settings
register under the User mode.
The default is 0.
The default is off.
If you mute the projector's audio output
and then increase or decrease the
volume, the volume is restored
automatically. You can prevent this
from happening by disabling the
volume control.
Typically, CC1 displays U.S. English
subtitles, while CC2 displays other
regional languages, such as French or
Spanish, depending on television
channel or media setup.