Smart Technologies SMART Board 600i5 Configuration And User's Manual page 71

A P P E N D I X A
Remotely managing your system through a network interface
Submenu setting
Volume
Mute
Volume Control
Closed Captioning
Language
Display Mode
Brightness
Contrast
Frequency
Tracking
Sharpness
White Peaking
Degamma
Color
Auto Signal Detect
Lamp Reminder
59
Description
Adjusts the projector's volume from -20 to 20.
Turns on or turns off the mute settings. Select On to mute the
projector's sound and Off to turn off mute.
Enables volume control on the ECP. Select On to enable volume
adjustment and select Off to disable volume adjustment if you prefer
to use your audio system or speaker (not included) controls.
Turns on or turns off the closed captioning feature.
Sets the closed captioning language to CC1 or CC2.
Typically, CC1 displays U.S. English subtitles, while CC2 displays
other regional languages, such as French or Spanish, depending on
television channel or media setup.
Adjusts the display output to SMART Presentation, Bright Room,
Dark Room, sRGB and User modes so you can project images from
various sources with consistent color performance:
SMART Presentation is recommended for color fidelity.
l
Bright Room and Dark Room are recommended for locations
l
with those conditions.
sRGB provides standardized accurate color.
l
User enables you to apply your own settings.
l
Adjusts projector brightness from 0 to 100.
Adjusts the difference between the lightest and darkest parts
of the image from 0 to 100.
Adjusts the display data frequency of the projected image from
-5 to 5 to match the frequency of your computer's graphics card.
Synchronizes your projector's display timing with your computer's
graphics card from 0 to 31.
Adjusts the projected image's sharpness from 0 to 31.
Adjusts the image color brightness from 0 to 10 while providing more
vibrant white shades. A value closer to 0 creates a natural image and
a value closer to 10 enhances brightness.
Adjusts the color performance of the display from 0 to 3.
Adjusts the Red, Green, Blue, Cyan, Magenta and Yellow colors on
the projector from 0 to 100 to provide custom color and luminance
output. Each color has a default value of 100. Adjustments to the
color settings register to the User mode.
Enables or disables signal searching of input connectors.
Select On to have the projector continuously switch inputs until
l
it finds an active video source.
Select Off to maintain signal detection in one input.
l
Select On to show or Off to hide the lamp replacement reminder when
it appears. This reminder appears 100 hours before the recommended
lamp replacement.