Smart Technologies SMART Board 600i5 Configuration And User's Manual page 33

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
Resolution Displays the projector's most recently
detected video source signal resolution
and refresh rate.
Firmware Version Displays the projector's digital display
processor (DDP) firmware version in
x.x.x.x format.
MPU Version Displays the projector microprocessor
unit (MPU) firmware version in x.x.x.x
format.
Network Version Displays the projector's network
communications processor firmware
version in x.x.x.x format.
Model Number Displays the projector's model number.
Serial Number Displays the projector's serial number.
21
Notes
If there is no current video input source
signal, this setting displays the last
known source signal image resolution
and refresh rate.
If you haven't enabled the Network
and VGA Out setting, this setting is
unable to display the projector's
network communications processor
firmware version and displays 0.0.0.0
instead.