C H A P T E R 3
Using your interactive whiteboard system
Using the remote control buttons
The projector remote control enables you to access on-screen menus and change projector settings.
Use the Power
button on the remote control or ECP to put the projector into Standby mode or to
turn it on. You can also use the Input button on the remote control or ECP to switch sources on the
projector.
Number
Function
1
Input
2
Menu
3
(Left), (Right),
(Up) and (Down) arrows
4
Hide
5
Mode
6
Mute
7
(Power)
8
(Enter)
9
(Volume Up)
10
(Volume Down)
13
Description
Select a video and audio input source.
Show or hide the projector menus.
Change the menu selections and adjustments.
Freeze, hide or display the image:
Press once to freeze the image.
l
For example, you can display a question on
the screen while you check your e-mail.
Press again to hide the image, that is, to
l
display a black screen.
Press again to return to the live image.
l
Select a display mode.
Mute audio amplification.
Turn on the projector or put it into Standby mode.
Accept the selected mode or option.
Increase audio amplification volume.
Decrease audio amplification volume.