Included Accessories; Extended Control Panel (Ecp); Remote Control - Smart Technologies SMART Board 600i5 Configuration And User's Manual

C H A P T E R 1
About your interactive whiteboard system
DLP Link™ technology that ensures compatibility with the emerging 3D content ecosystem
l
Protected cable routing through a cable cover that limits tampering and clutter
l
A secure mounting and installation system that includes the following:
l
An optional projector padlock ring to prevent removal of the projector from the boom
o
Mounting hardware for solid masonry or framed wall installations, as well as a safety
o
tether
Templates and instructions for positioning the system safely
o

Extended Control Panel (ECP)

Your projector system's ECP attaches to the bottom frame
of your interactive whiteboard. The ECP features controls
for power, source selection and volume adjustment, as well
as an integrated USB hub that enables you to switch
seamlessly between two connected computers.
Connection receptacles for your source inputs include:
One USB A receptacle on the front of the ECP for USB drives
l
Two USB A receptacles behind the interactive whiteboard
l
Two RCA jacks on the front of the ECP for dual-channel audio input
l
One RCA jack on the front of the ECP for composite video input
l
One captive USB B receptacle for your primary computer
l
One DB15M receptacle behind the interactive whiteboard for connecting to the projector
l
One USB B receptacle behind the interactive whiteboard for connecting a secondary computer
l

Included accessories

The following accessories are included with your interactive whiteboard system.

Remote control

The remote control enables you to control the system and set up your projector. Use the
remote control to access menu options, system information and input selection options.
4