100
Symbol
Description
PointPos.°
Setting identical to Manual mode, p. 65.
Speed Corr
Setting identical to Manual mode, p. 74.
FabricThickness
If present, setting identical to Manual mode, p. 79.
5.
Exit the submenu using the ESC or
The changed values are stored immediately.
6.
If necessary, create further seam sections or exit Program-
ming mode using the ESC button.
The program is saved. The machine switches to Automatic
mode and the newly created program is selected.
5.6.6
Editing programs
Parameters of already created programs can be adjusted subse-
quently.
To edit a program:
1.
Select the desired program.
2.
Press the P button.
The control switches to Edit mode.
The following information is shown, and the P in the program
number field flashes:
Fig. 48: Display in editing mode
Operating Instructions 867-M PREMIUM - 02.0 - 05/2017
◄
button.
1
4.5
25
-
Programming
5 2.0
+
+