Machines With Mechanically Set Needle Thread Tension And With Electromagnetic Tension Release - Duerkopp Adler 550-867 Operating Instructions Manual

5.1.2 Machines with mechanically set needle thread tension and with electromagnetic
tension release
9
8
12
7
–
Conduct the thread through the threading guide 1 and clockwise
around the pretensioner 2.
–
Conduct the thread counter-clockwise around the tensioner 3.
–
Conduct the thread clockwise around the tensioner 4.
–
Conduct the thread through threading guide 5.
–
Pull the thread underneath the thread take-up spring 7 and
conduct it through the thread regulator 6 to the thread lever 9.
–
Conduct the thread through the thread lever 9 and the thread
tension sensor 8.
–
Conduct the thread through the thread clamp 10 and the threading
guides 11 and 12 on the needle bar.
–
Thread the thread into the needle eye 13.
10
11
12
13
6 5
1
2
3
4