Unpacking And Installing The Copier; Unpacking - Canon NP6320 Service Manual

CHAPTER 8 INSTALLATION
II. UNPACKING AND INSTALLING THE COPIER
When a piece of metal is moved from a cold place to a warm place, droplets of water form on
its surface. This phenomenon is known as condensation and affects the performance of machines.
The simplest way to eliminate condensation in the copier, any machines for that matter, is to leave
it alone until it warms to room temperature (at least one hour).
A.

Unpacking

Step
1 Open the coardboard packing case of the
copier and take out the box of accessories.
2 Cut open the widest side of the packing case,
avoiding the corner, containing the metal
knife.
3 Open up the side of the packing case com-
pletely, and slide out the copier onto this
side. Remove the two polystyrene shells
from the copier.
8-2
COPYRIGHT © 1999 CANON INC.
Work
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks