Canon NP6320 Service Manual page 149

Each copier is carefully adjusted and srictly inspected before it leaves the factory.
It is important to install and set up the copier properly in order to maintain its
performance at the same high level.
The service person should fully understand the function of the copier, install it
properly in a suitable location and carry out the necessary checks before it is used by
the user.
I. LOCATION ...................................8-1
II. UNPACKING AND INSTALLING
THE COPIER ...............................8-2
A. Unpacking .............................8-2
B. Mounting the Drum ...............8-5
C. Checking the Operation ........ 8-6
D. Adding Toner .........................8-7
E. Checking the Image ..............8-8
III. SETTING THE CASSETTE
SIZE ............................................. 8-9
COPYRIGHT © 1999 CANON INC.
CHAPTER 8
INSTALLATION
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
A. Modifying the Cassette
Size ....................................... 8-9
B. Replacing the Cassette
Spring ................................. 8-14
C. Removing the Pick-up
Roller .................................. 8-16
IV. RELOCATING THE COPIER .... 8-17
V. INSTALLING THE CONTROL
CARD-V .................................... 8-18