Canon NP6320 Service Manual page 246

CHAPTER 10 TROUBLESHOOTING
Mode No.
C11 Lower cassette size
C12 Upper cassette size
C13 Nip width check
C14 LED ON check (on control panel)
C15 AE mode setting
C16 For factory adjustment
C17 Fixing unit temperature adjustment
C18 EEPROM reset
C19 Automatic energy saving mode on/
off
C20 Automatic shut-off checking
10-68
COPYRIGHT © 1999 CANON INC.
Default
Display
Settings
0 or 1
0 to 5
170
140 to 190
1 or 0
Remarks
The size of the cassette is indicated in
_ code in response to the output of the ac-
tivated cassette switch; see Table 10-
801.
_ Perform this mode when checking the
nip width.
_
1 Selects/Deselects the AE mode at time
of power-on: 1, AE ON; 0, AE OFF.
0 Do not change the setting; i.e., keep it to
'0'.
Set the three digit described on the fix-
ing assembly label.
Initializes EEPROM on the DC control-
_ ler PCB.
1 To activate the energy saving mode,
press "1" and then "Sorter" keys. To in-
activate, press "0" and then "Sorter"
keys.
To perform checking, press the "Sorter"
_
key. As a result, the copier shuts off
when service mode C08 is "1".
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)