Canon NP6320 Service Manual page 87

c. Detaching the Blade, Developing
Cylinder, and Side Seal
1) Detach the developing assembly from the
copier.
2) Remove the two screws [1], and detach
the developing assembly upper cover [2].
3) Place a newspaper on the floor, and pour
out the toner from the developing assem-
bly.
4) Remove the two screws [3], and detach
the blade mount together with the blade.
COPYRIGHT © 1999 CANON INC.
CHAPTER 4 IMAGE INFOMATION SYSTEM
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[ 2 ]
[ 1 ]
Figure 4-814
[ 3 ]
Figure 4-815
4-25