Chapter 8 Installation; Location - Canon NP6320 Service Manual

I. LOCATION
The location of the copier should be chosen based on the following considerations. If possible,
make a visit to the user for a study of a site before delivery of the copier.
a. The ambient temperature should be between 15° and 35°C and the humidity, 10% to 80%.
Avoid locations near water faucets, humidifiers, water boilers, and refrigerators.
b. Avoid locations near open fire or subject to dust or ammonia fumes, and avoid direct rays of
the sun. Provide curtains over the windows if necessary.
c. Choose a well-ventilated place.
Note:
The level of ozone generated by the copier is not likely to harm the health of those around it.
The odor, however, may prove to be unpleasant to some individuals.
d. Make sure all feet of the copier will be in contact with the floor.
e. Allow at least 10 cm from any wall to provide access.
COPYRIGHT © 1999 CANON INC.
10 cm min.
1.5 m min. Copier
2 m min.
Figure 8-101
10 cm min.
1.5 m min. Copier
2.5 m min.
Figure 8-102 (with sorter)
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 8 INSTALLATION

8-1