CHAPTER 3 MECHANICAL SYSTEM
II. DRIVE SYSTEM
A.
Deck Drive Unit
1) Detach the right cover and right door from
the copier.
2) Detach the rear cover from the pedestal.
3) Remove the four connectors (J1, J2, J3, J4)
[1] and two fastons [2] from the paper deck
PCB.
4) Detach the deck stopper plate, and pull out
the deck.
5) Remove the four screws [3], and detach
the right cover [4] from the pedestal.
3-6P
COPYRIGHT © 1999 CANON INC.
[1]
Figure 3-201P
Figure 3-202P
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]