Feeder Assembly - Canon NP6320 Service Manual

B.

Feeder Assembly

1.

Feeder Assembly

Note:
Make sure that the drum unit, transfer
corona assembly, and developing as-
sembly have been detached before de-
taching the feeder assembly.
1) Release the feeder assembly.
2) Detach the main motor assembly; see p.5-
21.
3) Remove the E-ring [1], and detach the
bushing [2].
4) Detach the inside cover, and remove the
E-ring [3]; then, detach the bushing [4].
5) Detach the grounding wire (1 screw) [5].
COPYRIGHT © 1999 CANON INC.
CHAPTER 5 PICK-UP/FEEDING SYSTEM
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
Figure 5-317 (rear)
[3]
[4]
[5]
Figure 5-318
5-17