Canon NP6320 Service Manual page 160

CHAPTER 8 INSTALLATION
3) Fix the stop plate in place using screws.
Note:
See "Replacing the Cassette Spring"
when using a different type of spring.
4) Remove the side stop plate each from the
two cassettes.
5) Remove the screw that holds the paper
size plate in place.
6) Slide the paper size plate along the index
on the bottom of the cassette to suit the
desired paper.
8-10
COPYRIGHT © 1999 CANON INC.
Bottom of
cassette
Figure 8-302
Shift the leaf spring in
this direction to remove
the side stop plate
Figure 8-303
Paper size plate
Figure 8-304
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Rear stop plate
Side stop plate
Screw