2-Sided Printing; Finishing - Xerox ColorQube 9201 User Manual

Transparency Separators
Select this option to display the Transparency Separators
screen. If this option is selected, a blank or printed sheet is
placed after each transparency. The paper type for your job
must be set to Transparency using the Other Type menu
option.
Select Blank Separators or Printed Separators using the
•
Separator Options drop-down menu.
• Select the Separator Color.

2-Sided Printing

You can have your job automatically printed on both sides of a sheet of paper.
• 1-Sided Print prints on one side of the paper or transparency. Use this option when printing on
transparencies, envelopes, or labels.
• 2-Sided Print prints on both sides of a sheet of paper. The images are printed so the job can be
bound on the long edge of the sheet.
• 2-Sided Print, Flip on Short Edge prints on both sides of a sheet of paper. The images are printed
so the job can be bound on the short edge of the sheet.
Note: Some media types, sizes, and weights cannot be automatically printed on both sides. Refer
to www.xerox.com

Finishing

Use to select the finishing options for the print job, such as stapling or hole punching. To change the
finishing options, select the button to the right of the summary to display the finishing selection drop-
down menu.
Stapling
• Select the number or location of staples required to staple each set.
• Select No Stapling to switch off stapling.
Note: The stapling options vary depending on the type of finisher.
for specifications information.
ColorQube™ 9201/9202/9203
Paper/Output
135
Print