High Volume Finisher Booklet Maker Stapler
•
If a problem occurs in the Booklet Maker Staplers, remove both Stapler Cartridges and release any
misfed staples. Refer to
cartridge.
•
Remove any partially used staples from the Stapler Cartridges and Stapler Heads.
•
Reinstall the Stapler Cartridges.
Document Feeder Problems
Document feeder misfeeds can occur in the document feeder. The device has designated document
feeder clearance areas. If a misfeed occurs, a message and clearance instructions are displayed on the
touch screen. There are also labels showing how to clear each area.
If misfeeds persist, or occur intermittently, check the following points:
•
Check the top cover of the document feeder is firmly closed.
•
Check your originals. Ensure that your originals are of a good quality.
Note:
If you have poor quality originals, use the document glass to copy a new set.
•
Ensure that the document feeder guides are against the edges of the loaded originals.
•
Check that your originals are within specification and that the loaded originals do not cover the
maximum fill line on the document feeder guides. Refer to
information.
Image Quality Problems
Additional options for correcting image
quality problems are available in Tools.
They provide various tests to check the
functionality of the system and identify
performance levels.
•
Press the Machine Status button.
Select the Tools tab.
•
Select Troubleshooting. The
troubleshooting options are
displayed.
Staple Cartridges
on page 293 for instructions on removing the staple
www.xerox.com
for specifications
ColorQube™ 9201/9202/9203
General Care and Troubleshooting
Troubleshooting
301