Chapter Starts - Xerox ColorQube 9201 User Manual

5. Select a Printing Option from the drop-down menu for each of the covers required:
• Blank Cover is used if no printing is required.
• Print on Side 1 is used to print the first or last page of your document onto side 1 of the front
or back cover sheet.
• Print on Side 2 is used to print the first or last page of your document onto side 2 of the front
or back cover sheet.
• Print on Both Sides is used to print the first or last two pages of your document onto side 1
and side 2 of the front or back cover sheet.
Note: If Front & Back Same is selected, the same programing options are applied to the Front and
Back cover.
6. Select the paper tray that contains the cover media.
Select Close to return to the Special Pages screen.
7.
A list of the selected Special Pages is displayed on the screen. To make changes, select the item in
the list you wish to change and use Edit. Use Delete or Delete All to delete unwanted entries.
Select Close Menu to exit from the drop-down menu.
8. Select Save to confirm your selections and run the job.

Chapter Starts

Use the following instructions to program Chapter Starts:
1. On the Copy tab, select the paper you
want to use the job.
Note: Special Pages is not available if
Auto Paper is selected.
2. Select the Output Format tab,
Special Pages button and then
Chapter Starts.
Output Format
ColorQube™ 9201/9202/9203 35
Copy