Automatic Light Lines Fix; Resets - Xerox ColorQube 9201 User Manual

Troubleshooting

Automatic Light Lines Fix

Use this option to fix any Banding
problems.
• Quick Banding Fix corrects banding
temporarily and may slow print
speeds until a Full Banding Fix is
completed.
On is used to correct banding
•
when it is detected.
• Off is selected if no action is
required.
• Full Fix takes approximately eight minutes to complete.
• Eco Fix is selected to correct banding when the device is not in use.
• Always Fix is selected to correct banding when it is detected.
• Off is selected if no action is required.

Resets

Use this option to reset the system
software.
• Software Reset on page 285
• Supply Counter Reset
284 ColorQube™ 9201/9202/9203
Administration and Accounting
on page 285