Edge Erase
Edge Erase enables you to specify how much of the image to erase around the edges of your
document. For example, you can remove the marks caused by punched holes or staples in your original.
The options are:
•
All Edges is used to erase an equal
amount from all the edges. Use the
arrow buttons to adjust the amount
to be erased from 1 mm to 50 mm
(0.1" to 2.0"). All marks or defects
within the measurement set are
deleted.
•
Individual Edges enables an
individual amount to be erased from
each of the edges.
Use the arrow buttons to adjust the
amount for each edge, from 1 mm to 50 mm (0.1" to 2.0").
Select Save to save your selections and exit.
Filing Options
Use the filing options to specify details
about the scanned images to be stored, for
example the file name, the file format and
the overwrite conditions. To access the
Filing Options, select Services Home and
Workflow Scanning. Then select the Filing
Options tab.
ColorQube™ 9201/9202/9203
Workflow Scanning
Filing Options
159