Introduction
Introduction
E-mail is a standard feature that can be
enabled. If enabled, it is selected by
pressing the Services Home button, then
the E-mail option.
E-mail enables the creation of an
electronic image file by scanning an
original hard copy document. The scanned
image is e-mailed to the specified e-mail
recipient or recipients over the internet or
intranet.
Using the E-mail feature allows you to
add and remove recipients and edit the
subject line of the e-mail message.
Most feature screens include these
buttons to confirm or cancel your choices.
•
Undo resets the current screen to
the values that were displayed when
the screen was opened.
•
Cancel resets the screen and returns
to the previous screen.
•
Save saves the selections made and
returns to the previous screen.
•
Close closes the screen and returns to the previous screen.
Instructions for sending an e-mail and using the basic features are provided in the
9201/9202/9203 Quick Use Guide.
you may have to enter log in details to access the features, refer to
180
ColorQube™ 9201/9202/9203
E-mail
If Authentication or Accounting has been enabled on your device
ColorQube™
Log In / Out
on page 195.