Emptying The Waste Ink Tray; Emptying The Hole Punch Waste Container - Xerox ColorQube 9201 User Manual

General Care
High Volume Finisher Booklet Maker Staple Cartridges:
1. Open the finisher door. Pull out the booklet maker module.
2. Lower the lever to gain access to the staple cartridges. Grip the staple cartridge and pull it out of
the staple head.
3. Dispose of the staple cartridge according to the instructions contained in the new staple cartridge
box.
4. Unpack and install the staple cartridge in the finisher. The staple cartridge clicks into place. Repeat
the procedure for the other booklet maker staple cartridge.
5. Push in the booklet maker module and close the finisher door.

Emptying the Waste Ink Tray

The Waste Ink Tray accumulates ink debris
resulting from printhead maintenance. You
must occasionally empty the Waste Ink
Tray. The device will not work if the waste
ink tray is full. The waste ink is non-toxic
and can be disposed of through your
normal refuse collection.
The device displays a message when the
tray is approximately 80% full, and will
not permit the printhead maintenance
sequence to begin when the tray is full.
The waste tray will need to be emptied approximately 4 times per year or more depending on usage.
CAUTION: If you remove the waste ink tray you must always empty it before replacing it.

Emptying the Hole Punch Waste Container

The hole punch waste container is a catch
tray that collects the waste punched
paper. Your device will prompt you when
the hole punch waste container needs
emptying.
Detail instructions are provided on the
touch screen. Follow the instructions and
labels provided when emptying the
container.
• Slide the hole punch waste container
out of the finisher. Dispose of the
waste punched paper in the waste bin.
• Install the emptied hole punch waste container, ensuring that the container is inserted correctly.
294 ColorQube™ 9201/9202/9203
General Care and Troubleshooting