Table of Contents
Advertisement
Table 6. Power-on and administrator password features.
Type of password
Power-on password
Administrator password
Administrator and power-on
password
Using the SCSISelect utility program
Starting the SCSISelect utility program
•
Enter the password to complete the system startup.
•
All choices are available on the Configuration/Setup Utility main menu.
•
No password is required to start the system.
•
Enter the password to access the Configuration/Setup Utility program.
•
All choices are available on the Configuration/Setup Utility main menu.
•
You can enter either password to complete the system startup.
•
The administrator password provides access to all choices on the
Configuration/Setup Utility main menu. You can set, change, or delete both the
administrator and power-on passwords, and allow a power-on password to be
changed by the user.
•
The power-on password provides access to a limited set of choices on the
Configuration/Setup Utility main menu. This limited access might include
changing or deleting the power-on password.
SCSISelect is a built-in, menu-driven configuration utility program that you can use
to:
•
View the default SCSI IDs
•
Locate and correct configuration conflicts
•
Perform a low-level format on a SCSI hard disk
The following sections provide the instructions needed to start the SCSISelect Utility
and descriptions of the menu choices available.
Note: If the server has a RAID adapter installed, use the configuration method
supplied with the RAID adapter to view or change SCSI settings for RAID
attached devices.
To start the SCSISelect utility program:
1.
Turn on the server.
2.
When the
press Ctrl+A.
Note: If an administrator password has been set, a prompt appears asking you to
enter the password to start the SCSISelect Utility program.
3.
When prompted, select either channel A (external) or channel B (internal).
4.
Use the arrow keys to select a choice from the menu.
•
Press Esc to return to the previous menu.
•
Press the F5 key to switch between color and monochrome modes (if the
monitor permits).
5.
Follow the instructions on the screen to change the settings of the selected items;
then, press Enter.
Results
Configuring the server
prompt appears,
49
Advertisement
Table of Contents
Troubleshooting
